Spray Paint A Car in 5 Steps - Spray Painting Techniques
Jul 27, 2009 More Saving
Top Sites For Money Saving Tips:
If you really think that you wish to paint a car then get ready for a full task ahead of you. It doesnt mean that you can’t or shouldn’t do it, it just signifies be sure you’re ready to see the job done from beginning to end. If you don’t finish the job entirely or the right way then youre going to be driving something that may be a bit embarrassing to the eye at the least.
To paint a car takes careful planning and ensuring that you’ve all of the supplies you need and the time to go through at least a couple of the stages.
There are things that you’re going to need by way of supplies. You would need masking tape, dust mask, goggles, sandpaper, wax/grease remover, primer paint, paper for covering, car wash and detergent, paint sprayer, putty with knife.
When you buy your sand paper be sure you buy fine and thick grit, as you may need both textures. The amount of primer and urethane based paint you need will be dependent on the size of your vehicle. Whether you want to use a paint sprayer is completely up to you, say you choose not to then the average spray paint cans will do fine. Be sure you wear appropriate clothing when you go to paint a car so your skin is not revealed.
Lastly be sure you’ve the right space to work in. You require to be able to work around your car. You most surely need good ventilation, and you will need to be able to protect it against the elements.
First you must actually wash your car well. It doesnt matter how clean it would look to you unless you just washed it, there will be a couple of debris on it that you must get rid of, otherwise the paint will not adhere the right way. Then once you’ve it washed nice and clean you’ve to get each of the old wax off it so that is where the wax/greaser remover comes in. It’s really important you go through these steps when you go to paint a car.
You’ll probably notice that you’ve a few rough spots on your latest finish. Say you go to paint a car that is in this condition, you’ll not get good coverage with the new paint. Put little pit marks made by stones or things like that just apply a little putty to fill them in. The use the sand paper to gently smooth the rough spots and small holes. Make sure you wipe away all the debris from sanding.
In order to paint a car, you must be perfectly certain that it is dry after your washing. This will take a couple of hours. Be certain it doesnt get dirty once more. Next masking tape off the areas that you dont want to get paint on.
Completely prime the car. Then sand it lightly again. Be sure to wipe the residue off.
Now you’re ready to apply the base coat of the new colour. Preferably with a spray gun. Totally spray it then let it dry for about 15 minutes. And then you can apply the second coat. Most often you can get away with 2 coats.
Let it dry for about one hour then you could apply the clear coat. Let dry 15 minutes then reapply. You’ll likely need about 3 coats of the clear to get a nice finish.
Related Articles
Tags: auto, auto bodywork, automotive, car painting, car repair, cars, hobbies, More Saving, recreation, self-help, Spray Paint
Leave a Reply